Table of Contents
Advertisement
WEBSHARE 242W
3.6.3.3.5 Restart
Click Restart with option Current Settings to reboot your router and restore your last saved
configuration.
If you wish to restart the router using the factory default settings (for example, after a
firmware upgrade or if you have saved an incorrect configuration), select Factory Default
Settings to reset to factory default settings.
You may also reset your router to factory settings by pressing in the small Reset pinhole
button on the back of your router for 10-12 seconds while the router is turned on. You have to
Switch Off and Switch On the device that boot with factory default settings.
3.6.3.3.6 User Management
To prevent unauthorized access to your router's configuration interface, all users are required
to login with a password. You can set up multiple user accounts, each with their own
password.
You are able to Edit existing users and Create new users who are able to access the
device's configuration interface. Once you have clicked on Edit, you are shown the following
options:
You can change the user's password, whether their account is active and Valid, as well as
add a comment to each user account. These options are the same when creating a user
account, with the exception that once created you cannot change the username. You cannot
delete the default admin account; however you can delete any other created accounts by
clicking Cancel when editing the user.
You are strongly advised to change the password on the default "admin" account when you
receive your router, and any time you reset your configuration to Factory Defaults.
39
Advertisement
Table of Contents
