Wiring Instructions
CONNECTING VIDEO MONITORS
Each CP 4.6 zone has a composite video output to allow viewing video from any of six A/V sources. Connect monitors
as shown in Figure 5 using RG6U cable with RCA type connectors. If more than two monitors are being used in a
zone, a composite video distribution amplifier is recommended. The CP 4.6 video outputs are buffered and are good
for up to 100' of RG6U.
Figure 5 – Video Output connections
Figure 6 – Source Loop outputs
SOURCE LOOP OUTPUTS
The CP 4.6 has six buffered, fixed-level
audio/video outputs (Figure 6). When set to
SOURCE LOOP OUT, these output signals from
the corresponding input source. This source loop
configuration allows the CP 4.6 to pass source
signals to another component, such as a home
theater controller, or to another CP 4.6 for shar-
ing sources in a multiple controller system.
7