Clean Door Lock Below 575 - Viking VDSC305 Service Manual

10 seconds after the door motor begins to turn, Sensor 3 is activated from the signal being sent
from VG on the Self Clean Timer and Switch LS2 to M1 is opened. This interrupts the power to the
door lock motor. Now switch T1- T2 is closed and sends power to the Relay R1. With Relay R1
energized, power is sent to the inside and outside Broil Elements to (208 – 240) and the Bake
Element to 120v. Switch T3-T4 is closed and sends power to the Cooling Fan. The oven begins to
heat
240 Volts
240v OHMS [R] WATTS [W] AMPS [I]
Inner broil element
Outer broil element
Bake element (120v)
Total amps
CLEAN DOOR LOCK BELOW 575 °
45.2 1275 5.30
32.6 1765 7.35
21.1 682 5.68
18.33
208v
Inner broil element
Outer broil element
Bake element (120v)
Total amps
18
208 Volt
OHMS [R] WATTS [W] AMPS [I]
45.2 957
32.6 1330
21.1 682
16.68
4.60
6.40
5.68