Philips RQ1285CC User Manual page 65

Problem
Specific types
only: The shaver
is not entirely
clean after I
clean it in the Jet
Clean System.
Possible cause
Specific types only: The
travel lock is activated.
The shaving unit is soiled or
damaged to such an extent
that the motor cannot run.
In this case, the shaving unit
symbol, the tap symbol and
the exclamation mark flash.
The temperature of the
shaver is too high. In this
case, the shaver does not
work and the exclamation
mark on the display flashes.
The cleaning fluid in the
cleaning chamber is soiled.
64
English
Solution
Press the on/off
button for 3 seconds
to deactivate the
travel lock.
Clean the shaving
unit or replace it (see
chapters 'Cleaning
and maintenance'
and 'Replacement').
Switch off the shaver
and let it cool down.
As soon as the
temperature of the
shaver has dropped
sufficiently, you can
switch on the shaver
again.
Empty and rinse the
cleaning chamber
and refill it with new
cleaning fluid.