Philips RQ1285CC User Manual page 42

English
3 sec. 3 sec.
1 Press the on/off button for 3 seconds to enter
the travel lock mode.
RQ128x: The display starts to count down
,
from 3. At 1, the appliance beeps to indicate that
it is locked.
The lock symbol lights up on the display. After a
,
few seconds it goes out.
Deactivating the travel lock
1 Press the on/off button for 3 seconds.
The motor starts running to indicate that the
,
travel lock has been deactivated.
The shaver is now ready for use again.
Note: When you place the shaver in the plugged-
in charger or Jet Clean System, the travel lock is
automatically deactivated.
Power-saving mode (RQ129x only)
The appliance is equipped with an automatic power-
saving mode. When the shaver enters the power-
saving mode, the light in the on/off button goes out
to save energy.
- When the appliance is switched off but detects
movement for 5 minutes (for instance when you
are travelling with the shaver in your suitcase), it
automatically goes into power-saving mode. This
mode prevents the shaver from being switched on
by accident.
The lock symbol flashes on the display to
,
indicate that the appliance is in power-saving
mode.
- To deactivate the power-saving mode, simply press
the on/off button.
41