RIDGID MS1250 Owner's Manual page 31

Repair Parts
Key
Part No.
No.
Screw Arbor
1 823351
2 816720 Washer Blade
3 823348 Collar Blade
4 828042 Blade
5 827886-2 Screw Sems M5 -35
6 821878 Screw Shoulder 10-32 x 7/8"
7 827498 Sleeve Rubber
8 827512 Lock Arbor
9 827516 Cap Grip
10 823402 •Spring
11 828101-1 Arm Guard Upper
12 823353 Plate Retainer Arbor Lock
13 823404 Screw Flat Hd M5 x 0.8-6
14 823359 Grommet Arbor Lock
15 828045 Bag Dust
16 828038 Elbow
17 828040-1 Screw Soc. Set Lock M6 x 1.0-16
18 827543 Chute Sawdust
19 828119 Screw Sems M5-25
20 816755-6 * Screw Pan Hd M5 x 0.8-16
21 823360 Bumper Lower Guard
* Standard Hardware Item - May Be Purchased Locally.
‡ CAUTION: See Mechanical Assembly Caution below.
• WARNING: Uncontrolled spring release of misinstallation of these parts may create a Hazard unless repair
is done by a qualified service technician.
CAUTION: Mechanical Assembly, to qualified service technician.
1. Wear approved eye protection when working with coil springs including spring, arbor lock 823402.
2. Incorrect re-assembly of torsion spring 828066 can cause an unsafe condition because cutting head fails
to rise fully to stop, or because spring fails through over-stress.
3. Improper reassembly of mechanisms controlling movement of lower guard 826878 can cause an unsafe
condition because guard fails to operate freely as cutting head is moved up and down.
Parts List For RIDGID 12" Compound Miter Saw
Model No. MS12501
RIDGID parts are available on-line at www.ridgidparts.com
Figure 2 Upper and Lower Guards ‡
Always order by part number - Not by key number
Description
Key
Part No.
No.
* Washer 6.5 x 11.8 x 1.6
22 820238-2
23 821862
24 821875-1
25 817449-1
26 820238-5 * Washer 6.5 x 13 x 0.8
27 823340-1
28 820725-01
29 820732-2
30 826879
31 826878 • Guard Lower
32 816677
33 821873
34 826876
35 817449-1
36 809372-3 * Screw Pan Hd 10-32 x 1/2
37 827409
38 828142 * Screw Flat Hd M6 x 1.0-13
39 820732-1 * Washer 7.5 x 16 x 0.6
40 820724-01
41 828141
31
Description
Bearing
Screw Shoulder M6-14
Nut Hex Lock M6 x 1.0
Link Actuator
Spacer 7 x 10 x 4
Washer 5.5 x 16 x 0.8
Retainer Guard
Spring Guard
Screw Shoulder 10-32x.50
Pivot Lower Guard
Nut Hex Lock M6 x 1.0
Retainer Bearing
Screw Shoulder M5 x 0.8-16
Washer 1/4 x 16 x 1