ASSEMBLY
Wheel Kit Installation
1. Install the two stands on the under frame using four 8×16 mm
flange bolts.
2. Install the two wheels on the axle shaft using the plain washers and
split pins. After installing the split pins, bend the pins to ensure that
the wheels are secured to the axle.
3. Install the axle assembly on the generator using four 8×16 mm
flange bolts and 8 mm flange nuts.
TORQUE: 17–22 lbf·ft (24–29 N·m, 2.4–3.0 kgf·m)
8×16 mm FLANGE BOLT (8)
WHEEL (2)
STAND (2)
96
AXLE SHAFT
20 mm
PLAIN WASHER (2)
8 mm FLANGE NUT (4)
GENERATOR
SIDE
SHORTER
UNDER FRAME
4.0×28 mm
SPLIT PIN (2)