Table of Contents
Advertisement
If you selected SDSL-HDLC or IDSL Line Types, you can choose Frame Relay as a Data Link Encapsu-
lation method. Choosing Frame Relay reveals the PPP over Frame Relay Enabled toggle.
If you toggle PPP over Frame Relay Enabled to On, the DLCI field appears, allowing you to enter a DLCI
value (16 is the default). The LMI option also appears, allowing you to select from ANSI (Annex D),
CCITT (Annex A), LMI, or None from the pull-down menu.
5.
If you chose the SDSL-ATM Line type, the next two fields, Data Circuit VPI and Data Circuit VCI are
editable. Enter the Virtual Path Identifier and Virtual Channel Identifier values that your provider specifies. If
you are using either SDSL-HDLC or IDSL Line Types, these fields do not appear.
6.
Press the Down arrow key until you reach NEXT SCREEN. Press Return to bring up the next screen.
Easy Setup Profile
The Easy Setup Profile screen is where you configure the parameters that control the Netopia 4652's
connection to a specific remote destination, usually your ISP or a corporate site.
On a Netopia 4652 you can add up to 15 more connection profiles, for a total of 16, although you can only use
one at a time, unless you are using Virtual Private Networks (VPNs).
Connection Profile Name:
Address Translation Enabled:
IP Addressing...
Local WAN IP Address:
Local WAN IP Mask:
Remote IP Address:
Remote IP Mask:
PPP Authentication...
PREVIOUS SCREEN
Note:
The appearance of this screen varies, depending on the settings in the previous screen.
1.
To enable address translation, toggle Address Translation Enabled to Yes (the default). For more
information on Network Address Translation, see the Firmware User's Guide chapter on "Multiple Network
Address Translation (MultiNAT)".
2.
From the IP Addressing menu item, choose between Unnumbered and Numbered addressing. Numbered is
the default for ADSL. It assigns a unique IP address to the ADSL WAN interface, as required by most ISPs'
routers. Unnumbered may be used for simpler configurations such as point-to-point applications.
Connection Profile 1: Easy Setup Profile
Easy Setup Profile
Yes
Numbered
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
None
NEXT SCREEN
Easy Setup 6-35
Advertisement
Table of Contents
