JVC KW-V620BT Instruction Manual page 27

TUNER TUNER
Reducing interference during FM
reception
1
Display the <Mode> screen. (Page 26)
2
The tuner selectivity is increased to reduce
interference between adjacent stations. (Stereo
effect may be lost.)
To restore the sound quality: Press [Wide].
• Reception may be subject to interference from
adjacent stations when [Wide] is selected, but
sound quality will not be degraded and the stereo
effect will remain.
Changing the tuner channel interval
The tuner channel interval changes depending on
the area you use this unit.
1
Display the <Mode> screen. (Page 26)
2
[US] Select this when using in North/
Central/South America. FM/AM
intervals are set to 200 kHz/10 kHz.
[SA] Select this when using in South
American countries where the FM
interval is 50 kHz. The AM interval is
set to 10 kHz.
[Europe] Select this when using in any other
areas. FM/AM intervals are set to
50 kHz/9 kHz.
• The initial setting is [US] for KW-V620BT
Region 1, and [SA] for KW-V620BT Region 4.
Presetting stations
Storing stations in the memory
You can preset 6 stations for each band.
Automatic presetting — SSM (Strong-station
Sequential Memory)
(Hold)
The local stations with the strongest signals are
found and stored automatically.
Manual presetting
1
Tune in to a station you want to preset.
(Page 26)
2
Select a preset number.
The station selected in step 1 is stored.
(Hold)
ENGLISH 27