Led Display; Before First Use - Philips Norelco S7370 Instructions Manual

Rechargeable cordless tripleheader shaver
Hide thumbs Also See for Norelco S7370:
Table of Contents

Advertisement

ENGLISH
12

LED Display

◗ Remove any sticker or protective foil from
the display before using shaver.
◗ The display provides the following
information:
◗ Charging Indicator
C
- Quick charge: When the shaver does NOT
contain enough energy for one shave, the
charging light will blink quickly.
- If the shaver does contain enough energy for one
shave, the charging light will blink slowly.
◗ Full Charge Indicator
C
- When the battery has been fully charged,
the charging light lights up continuously.
After approximately 30 minutes the display
automatically switches off again.
- If the on/off button is pressed during or after
charging, the 'unplug for use' symbol will blink
indicating the shaver is still connected to the
outlet.
◗ Low Battery Indicator
C
- When the battery is almost empty (5 or less
shaving minutes left), the charging light
blinks orange.
C
◗ 'Unplug For Use' Indicator
The 'unplug for use' symbol will blink to remind
you the shaver is connected to the outlet.
C
◗ Replacement Shaving Heads Indicator
Every year, depending on your shaving behavior,
the replacement shaving heads indicator lights up
white continuously. See 'Replacing the Shaving
Heads' section for instructions to reset the
shaver. This reminds you that with new shaving
heads you will guarantee yourself optimal shaving
performance.
C
◗ Cleaning Indicator
For optimal shaving performance, we
recommend cleaning the shaver after EACH use.
The blinking faucet will remind you the
shaving unit needs to be cleaned. This happens
after each shave.
C
◗ Travel Lock
The shaver is equipped with a travel lock function.
You can use the travel lock function when you are
going to store the shaver for a longer period or if
you are going to take the shaver with you when
traveling. See 'Travel Lock' section for instructions
on how to use this function.

Before First Use

◗ Charge the shaver before you start using it
(see 'Charging'). Make sure the shaver is
switched off before you start charging it.
◗ Remove any sticker or protective foil from
the display before using shaver.
ENGLISH
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents