Cleaning The Trimmer - Philips Norelco S7370 Instructions Manual

ENGLISH
30
C
4 Remove one shaving head from the shaving
head holder. Remove the cutter from the
comb.
Do not clean more than one cutter and comb
at a time, since they are all matching sets. If you
accidentally put a cutter in the wrong comb, it
may take several weeks before optimal shaving
performance is restored.
C
5 Clean the cutter and comb under warm
tap water.
C
6 After cleaning, place the cutter back into
the comb with the cutter legs pointing
downwards.
C
7 Put the shaving head back into the shaving
head holder.
Make sure the notches of the shaving head fit
exactly into the projections on the shaving head
holder.
C
8 Hold the shaving head holder in your hand
1
and place the retaining ring on the shaving
2
head holder (1). Turn clockwise (2) to
reattach the retaining ring.
Do not place the shaving head holder on a
surface, as damage may occur.
9 Repeat the process for the other two
cutters and combs.
10 Reattach the shaving head holder to the
bottom part of the shaving unit.

Cleaning the Trimmer

Clean the trimmer after each use.
C
1 Attach the trimmer to shaver.
2 Turn shaver ON.
C
3 Rinse the trimmer under hot water. BUT
BE CAREFUL TO TEST WATER FIRST SO
AS NOT TO BURN OR SCALD HANDS.
4 Turn the shaver OFF. Shake off excess
water and allow trimmer to air dry
thoroughly.
Tip: For optimal trimmer performance, lubricate
the trimmer teeth with one drop of mineral
oil every 6 months.
ENGLISH
31