Yamaha 2006 RX10GTAXW Service Manual page 1216

c
LIGHTING SYSTEM
BULB(S)
1. Remove:
S Headlight bulb a
S Tail/brake light bulb b
S Meter light bulb c
2. Connect:
S Pocket tester
(to the bulb terminals)
WARNING
Keep flammable products and your hands
away from the bulb while it is on; it will be
hot. Do not touch the bulb until it cools
down.
3. Inspect:
S Bulb(s)
Terminal
–
1 2
1 – 3
HEADLIGHT BEAM SWITCH
1. Disconnect:
S Headlight beam switch coupler 1
2. Connect:
S Pocket tester
(to the headlight beam switch coupler)
3. Inspect:
S Headlight beam switch continuity
Faulty ! Replace.
Switch position
HI
LO
8-23
ELEC
Continuity
Yes
Yes
Continuity
Yes
No