I About The Hdd Disk Menu; I Display Of The Hdd Disk Menu - Panasonic WJ-HD309 Operating Instructions Manual

I About the HDD DISK MENU

The operations regarding the hard disk can be performed by displaying the "HDD DISK MENU" on monitor 2.
The "HDD DISK MENU" will be displayed when the SET button is pressed while displaying the system check complete window.
The "HDD DISK MENU" will also be displayed automatically after replacing or removing the hard disk.
The following operations can be performed on the "HDD DISK MENU".
Setting item
FORMAT
MIRROR ON
MIRROR OFF
REMOVE
RESTART
EXIT

I Display of the HDD DISK MENU

Information of the hard disk drive of the unit or the extension unit will be displayed on the "HDD DISK MENU".
HDD DISK MENU
Digital Disk Recorder
WJ-HD300 TOP MENU
FORMAT MIRROR ON MIRROR OFF REMOVE
1 2
120GB M 120GB M
MAIN
120GB 120GB
EXT7
120GB 120GB
EXT6
120GB 120GB
EXT5
*(120GB) *(ERROR)
EXT4
ADD (120GB) ADD (ERROR)
EXT3
120GB 120GB
EXT2
-
EXT1
LOST
Close the information of recording areas : [ SETUP/ESC ] OK : [ SET ]
120 GB: Indicates the hard disk capacity (disk existed
when last started up)
120 GB M: Indicates the hard disk capacity (mirrored disk
existed when last started up)
ADD (120 GB): Indicates that this hard disk is newly mount-
ed at this startup, but that it was not mounted last time.
Those parenthesized numbers indicate the capacity of
the hard disk.
ADD (ERROR): Indicates that this hard disk is newly
mounted at this startup, but that it was not mounted last
time. Then, an error is detected on the hard disk.
* (120 GB): Indicates that a different hard disk from the one
that existed at the last startup is mounted. Those paren-
thesized numbers indicate the capacity of the hard
disk.
* (ERROR): Indicates that a different hard disk from the one
that existed at the last startup is mounted, and an error
has been detected on the hard disk.
LOST: Indicates that a position where a hard disk was
mounted at the last startup has no hard disk.
–: Indicates that a hard disk is not mounted this time nor at
the last startup.
Description
Formats (initializes) the hard disk. It can also change the setting values for
the recording area respectively. Mirroring can also be started on this menu.
Recovers the mirrored hard disk.
Cancels mirroring.
Removes the hard disk drive from the system logically.
Restarts this unit.
Closes the "HDD DISK MENU".
RESTART EXIT
3 4
120GB 120GB
120GB 120GB
120GB 120GB
120GB 120GB
120GB 120GB
120GB 120GB
- -
Main unit/extension unit
Information about hard disk located in the main unit and extension unit
ERROR: Indicates that the hard disk has failed to be initial-
ized.
Important:
• It is impossible to operate the unit when there is a hard
disk with indications of * (capacity), * (ERROR), LOST
or ERROR. In this case, remove the relevant hard disk.
(Refer to page 135.)
• Hard disks with ADD (capacity) indication are not initial-
ized yet.
First, initialize them. It is impossible to record images on
it or to use it as a copy destination without initialization.
Note: The displayed available disk space on this menu will
not include the space required for data management.
Therefore, the understated available disk space will be
displayed.
It is possible to display information about the recording
area (allocated disk size for normal recording area,
event recording area, copy area) by pressing the
SETUP/ESC button while displaying the "TOP MENU" of
the "HDD DISK MENU".
Page
129
134
134
135
–
–
127