Epson SureColor S40600 User Manual page 37

20. Slide the media edge plates against the media and adjust them so that the round holes shown here
are centered over the edges of the media.
Caution: If your media is more than 0.02 inch (0.4 mm) thick, leave the media holding plates on the
sides of the product or they could damage the print head.
Note: Make sure to correctly position the media holding plates as shown here or your printouts may
contain banding, uneven tint, or stripes. Do not use the media holding plates if the sides of your
printouts are smudged or torn.
37