Setup Of Other Video Related Items (Video (Misc; Details On [Video (Misc)] Menu; Displaying Various Information (Information; Installing Application Software And Firmware (Install - Sony MCS-8M Operating Instructions Manual

Setup of Other Video Related Items (Video (Misc))

Make other settings related to videos in the items of the [Setup] menu > [Video (Misc)] menu.

Details on [Video (Misc)] Menu

Menu item Description
Switch Set the timing for switching videos.
Timing
Tip
If the signal format is set to 720p, this selection is
ignored.
Fade To Enable or disable the FTB button of the transition
Black control block.
Displaying Various
Information (Information)
You can confirm various information on the application
software and the firmware in the items of [Setup] menu >
[Information].
Installing Application
Software and Firmware
(Install)
Install application software and firmware onto the unit
from [Setup] menu > [Install].
Tip
It is not possible to individually select which software to
install. All of the application software and firmware are
installed together at one time.
Setup of Other Video Related Items (Video (Misc)) / Displaying Various Information (Information) / Installing Application Software and Firmware (Install)
Knob Parameter Meaning
V4 Timing Switching timing Any (fastest field
V4 Button Enables/disables
FTB button
1
Copy the software to be installed to the USB flash
drive and then insert the USB flash drive into the USB
connector of the unit.
Tip
Copy the software to be installed to the following
folder.
Folder name: \Sony\MCS\INSTALL
2
Display the [Setup] menu > [Install] menu and then
press the V4 knob to start the installation.
When installation is complete, a message prompting
you to restart the unit appears. Confirm that no errors
have occurred (i.e., "E" is not displayed).
Tip
For details on the message that appears at installation
completion, see "Message List" (page II-56).
3
Press the V3 knob (OK), and then turn off the unit and
turn it on again.
4
Check the version information of the application
software and firmware under [Information] in the
[Setup] menu.
Note
If you turn off the unit before application software update
is complete normally, the unit may not start properly. In
such cases, contact your local Sony representative.
Setting range
that can be
processed), Field1
(first field), Field2
(second field)
Enbl (enable)/Disbl
(disable)
II-55