Details On [Gpi/Tally] Menu - Sony MCS-8M Operating Instructions Manual

Fall: The trigger causes the output to decrease to a high
level, and that status will continue for a certain
duration (1 to 2 frames).
Any: Every time the trigger is activated, the output's high
and low levels change alternately.
If the GPI outputs are used as tallies, the relationship
between Tally 1 to 8 and the input signals is as follows.
Tally Input Signal
1 SDI 1
2 SDI 2
3 SDI 3
4 SDI 4
5 DVI-1
6 HDMI-1/VIDEO 1
7 HDMI-2/VIDEO 2
8 HDMI-3/VIDEO 3

Details on [GPI/Tally] Menu

To display the [GPI/Tally] menu, display the [Setup] menu and press the V1 knob while [GPI/Tally] is selected.
Menu item Description
GPI Input 1 Set the operation and trigger type of the
GPI input 1 contacts.
GPI Input 2 Set the operation and trigger type of the
GPI input 2 contacts.
GPI Input 3 Set the operation and trigger type of the
GPI input 3 contacts.
Knob Parameter Meaning
V3 Action Contact
operation
V4 Edge Trigger type
V3 Action Contact
operation
V4 Edge Trigger type
V3 Action Contact
operation
V4 Edge Trigger type
Setting range Reference
page
NotUse, CT, AT, II-44
KeyCT, KeyAT,
Aux1CT, Aux1AT,
Aux2CT, Aux2AT,
SS1 to SS20
NotUse, Rise,
Fall, Any
NotUse, CT, AT,
II-44
KeyCT, KeyAT,
Aux1CT, Aux1AT,
Aux2CT, Aux2AT,
SS1 to SS20
NotUse, Rise,
Fall, Any
NotUse, CT, AT, II-44
KeyCT, KeyAT,
Aux1CT,
Aux1AT,
Aux2CT, Aux2AT,
SS1 to SS20
NotUse, Rise,
Fall, Any
Details on [GPI/Tally] Menu
II-45