Front Panel - NETGEAR WNDR3300f Setup Manual

Front Panel

Figure 2
You can use the status lights on the front of the wireless router to verify various conditions.
Table 1. Status Light Descriptions
Item Function Activity
1. Power Solid Green
Fast Blink Green The unit is starting up, or the restore factory settings button is being
Slow Blink
Green
Off
2.4 GHz Solid Amber
2.
Mode
Solid Green
Blinking Amber/
Blinking Green
5 GHz Solid Blue
3.
Mode
Off
Blinking Blue
Internet Off
4.
Solid Amber
Getting to Know Your Wireless Router
Description
Power is supplied to the router.
pushed to restore the factory default settings.
Firmware is corrupted. See
page 28 for instructions on restoring your router firmware.
Power is not supplied to the router.
The unit is operating in Legacy G mode at 2.4 GHz
a
(5 GHz Mode [item 3] is also on).
The unit is operating in 11n mode at 2.4 GHz
b
(5 GHz Mode [item 3] is off).
Data is being communicated over a wireless network.
The unit is operating in 11n mode at 5 GHz
c
(2.4 GHz Mode [item 2] is also on, amber).
11n mode at 5 GHz is off
(2.4 GHz Mode [item 2] is on, green).
Data is being communicated over the wireless network.
No Ethernet cable is connected to the modem.
The Ethernet cable connection to the modem has been detected.
Wireless Router Setup Manual
"Checking Basic Router Functions" on
3