Viewing A List Of Attached Devices; Configuration File Management - NETGEAR RP614 v4 Reference Manual

RP614v4 Cable/DSL Router Reference Manual

Viewing a List of Attached Devices

The Attached Devices menu contains a table of all IP devices that the router has discovered on the
local network. From the Main Menu of the browser interface, under the Maintenance heading,
select Attached Devices to view the table, shown below.
Figure 3-4
For each device, the table shows the IP address, NetBIOS Host Name (if available), and Ethernet
MAC address. Note that if the router is rebooted, the table data is lost until the router rediscovers
the devices. To force the router to look for attached devices, click the Refresh button.

Configuration File Management

The configuration settings of the RP614v4 router are stored within the router in a configuration
file. This file can be saved (backed up) to a user's computer, retrieved (restored) from the user's
computer, or cleared to factory default settings.
Maintenance 3-5
v3.1, June 2008