Viewing Attached Devices; Viewing, Selecting, And Saving Logged Information - NETGEAR DG834N Reference Manual

Rangemax next wireless adsl2 plus modem router
Hide thumbs Also See for DG834N:
Table of Contents

Advertisement

DG834N RangeMax NEXT Wireless ADSL2+ Modem Router Reference Manual

Viewing Attached Devices

The Attached Devices screen contains a table of all IP devices that the modem router has
discovered on the local network. In the main menu, under Maintenance, select Attached Devices
to view the table, shown in the following screen.
Figure 4-6
For each device, the table shows the IP address, device name if available, and the Ethernet MAC
address. Note that if the modem router is rebooted, the table data is lost until the modem router
rediscovers the devices. To force the modem router to look for attached devices, click the Refresh
button.

Viewing, Selecting, and Saving Logged Information

The modem router logs security-related events such as denied incoming service requests, hacker
probes, and administrator logins. If you enabled content filtering in the Block Sites screen, the
Logs screen can show you when someone on your network tries to access a blocked site. If you
enabled e-mail notification, you receive these logs in an e-mail message. If you do not have e-mail
notification enabled, you can view the logs here.
4-10
Managing Your Network
v1.0, April 2008

Advertisement

Table of Contents
loading

Table of Contents