Using An Ipod Or Iphone - Panasonic SC-PM500 Operating Instructions Manual

Note on CDs
• This system can access up to 99 tracks.
• This system can play MP3 files and CD-DA format audio
CD-R/RW that have been finalised.
• This system can fail to play some CD-R/RW because of
the condition of the recording.
Note on MP3s
• Files are treated as tracks and folders are treated as
albums.
• This system can access up to 999 tracks, 255 albums
(including root folder) and 20 sessions.
• Disc must conform to ISO9660 level 1 or 2 (except for
extended formats).
• To play in a certain order, prefix the folder and file names
with 3-digit numbers in the order you want them to play.
Limitations on MP3 playback
• If you have recorded MP3s on the same disc as
CD-DA, only the format recorded in the first session can
be played.
• Some MP3s cannot be played because of the condition
of the disc or recording.
• Recordings will not necessarily be played in the order
you recorded them.
MPEG Layer-3 audio coding technology licensed from
Fraunhofer IIS and Thomson.

Using an iPod or iPhone

Connector
1
Press to open the cover and insert a compatible
dock adapter.
iPhone
(not included)
Dock adapter
(not included)
2
Connect the iPod or iPhone firmly.
Make sure to remove the iPod or iPhone from its case.
3
Press [iPod] and then press [4/9] to start
playback.
Pause playback Press [4/9] or [8].
Skip track
Press [2] or [6] (main unit:
[2/3] or [5/6]).
Search the
Press and hold [3] or [5]
current track (main unit: [2/3] or
[5/6]).
View iPod or Press [iPod MENU] in the play
iPhone menu, mode.
Return to previous
menu
Select an iPod or
Press [R, T] and then press [OK].
iPhone menu item
Note:
• Make sure to align your iPod or iPhone with the
connector when inserting the iPod or iPhone.
• The operations may vary or not work depending on the
iPod or iPhone models.
• Depending on the model, it may be necessary to remove
the iPod or iPhone and select the album, artist, etc. on
the iPod or iPhone.
• Read the User Guide of the iPod or iPhone for the
operating instructions.
Charging an iPod or iPhone
An iPod or iPhone is charged automatically when
connected to the system (even when the system is in
standby mode).
• See the iPod or iPhone display for its battery charging
status.
• Disconnect the iPod or iPhone if it is not used for an
extended period of time after charging is complete.
• Charging stops when the battery is fully charged. The
battery will deplete naturally.
7
7