Connection Status - NETGEAR RANGEMAX WNDR3300 User Manual

NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 User Manual
Table 4-1. Wireless Router Status Fields (continued)
Field
Wireless 11G Channel
Port
(continued)
Mode
Wireless AP
Broadcast
Name

Connection Status

To view the connection status, on the Router Status screen, click Connection Status.
Figure 4-5
The following table describes the connection status settings.
Table 4-2. Connection Status Settings
Item Description
IP Address The IP address that is assigned to the router.
Subnet Mask The subnet mask that is assigned to the router.
Default Gateway The IP address for the default gateway that the router communicates with.
4-6
Description
Identifies the 11G channel of the wireless port being used. Click the link to
the online document "Wireless Networking Basics" in Appendix B
frequencies used on each channel. In Up to 270Mbps at 2.4GHz mode and
Up to 130Mbps at 2.4GHz mode, the 11G channel is not active.
Indicates the wireless communication mode:
• Up to 270Mbps at 2.4GHz
• Up to 270Mbps at 5GHz & 54Mbps at 2.4GHz (default)
• Up to 130Mbps at 2.4GHz
• Up to 130Mbps at 5GHz & 54Mbps at 2.4GHz
Indicates whether the radio feature of the router is enabled. If this feature is
not enabled, the Wireless light on the front panel is off.
Indicates whether the router is broadcasting its SSID.
v1.1, October 2008
Using Network Monitoring Tools
for the