NETGEAR RANGEMAX WNDR3300 User Manual page 39

NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 User Manual
• Enable SSID Broadcast. Clear this check box to disable broadcast of the SSID, so that only
devices that know the correct SSID can connect. Disabling SSID broadcast nullifies the
wireless network discovery feature of some products such as Windows XP.
Note: The SSID of any wireless access adapters must match the SSID you configure
in the wireless router. If they do not match, you will not get a wireless
connection to the wireless router.
The Fragmentation Threshold, CTS/RTS Threshold, and Preamble Mode options are reserved
for wireless testing and advanced configuration only. Do not change these settings.
• WPS Settings. For information about WPS settings, see
Configure Your Wireless Network" on page
• Restricting access by MAC address. You can use a Wireless Card Access List to restrict
access. See "Restricting Access to Your Router" on page
Safeguarding Your Network
"Using Push 'N' Connect (WPS) to
2-10.
v1.1, October 2008
2-16.
2-17