NETGEAR RANGEMAX WNDR3300 User Manual page 35

NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 User Manual
3. Select the PIN Number radio button.
4. Go to the client wireless computer. Run a WPS configuration utility. Follow the utility's
instructions to generate a PIN. Take note of the client PIN.
5. From the wireless router Add WPS Client screen, enter the client PIN number, and then click
Next.
• The wireless router tries to communicate with the client for 4 minutes.
• The wireless router WPS screen displays a message confirming that the client was added
to the wireless network. The wireless router generates an SSID, and implements WPA/
WPA2 wireless security.
6. Note the new SSID and WPA/WPA2 password for the wireless network. You can view these
settings in the Wireless Settings screen. See
on page 2-4
To access the Internet from any computer connected to your wireless router, launch a browser such
as Microsoft Internet Explorer or Mozilla Firefox. You should see the wireless router's Internet
LED blink, indicating communication to the ISP.
Note: If no WPS-capable client devices are located during the 2-minute time frame, the
SSID will not be changed and no security will be implemented on the wireless
router.
Safeguarding Your Network
"Manually Configuring Your Wireless Settings"
v1.1, October 2008
2-13