Connection Status - NETGEAR MBR624GU User Manual

Table 4-2. Router Statistics Fields (continued)
Field
ADSL Link Connection Speed
Downstream or
Upstream
Line Attenuation
These statistics
might help your
Noise Margin
technical support
representative if
there is a connection
Poll Interval
problem.

Connection Status

Click the Connection Status button on the Router Status screen to view the connection status:
Figure 4-5
This screen shows the following statistics:
Table 4-3. Connection Status Fields for HSDPA Status
Field Description
Connection Status The status of the Internet connection.
• Scanning. The modem is scanning for broadband wireless networks in your area.
• Connected. The router is connected to the Internet.
• No USB Device Attached. The router does not detect a USB modem connected to
its USB port. Either the modem is disconnected, or it is not correctly seated. To
correct the problem remove the modem and reinsert it into the port.
Managing Your Network
3G Broadband Wireless Router MBR624GU User Manual
Description
Typically, the downstream speed is faster than the upstream
speed.
The line attenuation increases the further you are physically
located from your ISP's facilities.
This is the signal-to-noise ratio and is a measure of the quality
of the signal on the line.
Specifies the interval at which the statistics are updated in this
window. Click Stop to freeze the display.
v1.0, January 2009
4-7