NETGEAR ME101 User Manual page 7

4. Turn off the gaming console or other Ethernet-enabled device.
5 Connect the provided Ethernet cable between the ME101 Wireless Bridge and the gaming
console or other Ethernet-enabled device.
Note: The ME101 Wireless Bridge should be connected to one device only. Don't connect
it through a network switch or hub.
6. Connect the power adapter to the wireless bridge and plug the power adapter in to a
power outlet. The Power
7. After you see the Wireless LAN light
Ethernet-enabled device.
If the bridge and the Ethernet-enabled device are successfully connected, the Network
light will light up. This light flashes when there is network activity.
Note: If your setup works with the default settings, you don't need to install the software
from the provided CD to configure the bridge unless you need to change the
Country/Region setting from the default setting (U.S.A.).
Default Ethernet DC in 5V Antenna
ME101 Wireless
Ethernet Bridge
and Wireless LAN
Gaming console or other
Ethernet-enabled device
lights should light up.
light up, turn on the gaming console or other
5