NETGEAR ME101 User Manual page 14

1. Type http:// and the IP address of
the bridge (the default is
192.168.0.200) as the Web address
in the browser and press Return.
You'll see the Information page.
2. To change the SSID for the bridge
to connect to, click Wireless
Settings.
3. Type admin as the User ID and
type password as the Password.
4. Click OK.
5. Type the SSID of the wireless
router or access point.
6. If you're not in the United States, select the correct country or region from the
Country/Region list. Click Yes to accept the new country or region.
Having the bridge set to the wrong country or region may result in the violation
of local laws.
7. Click Apply.
8. If you're through making changes, click Logout.
9. To use the bridge with a different Ethernet-enabled device, see Installing the ME101 on
page 4 to connect the bridge.
1. Start your browser software.
2. Type http:// followed by the IP
address for the bridge (the default
is 192.168.0.200) as the Web
address and press Return.
You'll see the Information page.
3. To change the password, click
Change Password.
4. Type admin as the User ID and
type the current password
(password is the default) as the
Password.
12