Panasonic CF-T1 Reference Manual page 46

External Display
About [Intel® Extreme Graphics]
Extended Desktop
About [Intel® Extreme Graphics]
The selection of the display destination, adjustment of the brightness
and contrast can be done in the following procedure:
Windows 2000
[Start] - [Settings] - [Control Panel] - [Intel® Extreme Graphics] - [Devices]
Windows XP
[start] - [Control Panel] - [Other Control Panel Options] - [Intel® Extreme Graphics] -
[Devices]
With Extended Desktop, you can use both the internal LCD and the external display as an
extended display domain. You can also drag a window from the internal LCD to the
external display.
1
Windows 2000
Select [Start] - [Settings] - [Control Panel] - [Intel® Extreme
Graphics] - [Devices].
Windows XP
Select [start] - [Control Panel] - [Other Control Panel Options] -
[Intel® Extreme Graphics] - [Devices].
2
Select [Extended Desktop], make the settings for [Primary
Device] and [Secondary Device].
To make the settings for each display (colors, screen area, etc.), select [Device
Settings] and change the settings where necessary, then select [OK].
3
Select [OK].
At the confirmation message, select [OK].
NOTE
G
There are some applications that cannot be used in the Extended Desktop. (e.g.,
the Display Rotation Tool)
G
When the button to maximize a window is pressed, one of the displays will show the
maximized display.
G
A window that has been maximized cannot be moved to the other display.
G
You cannot switch the display destination by pressing Fn + F3 .
G
Popup windows that are displayed using Fn key combination operations are
displayed only on the primary device.
46