Panasonic CF-T1 Reference Manual page 39

SD Memory Card/MultiMedia Card
D. Set and eject*
Add the check mark if you want to set and eject the SD memory card instead of
entering a password.
* The setting method is set separately for each computer. Different SD memory
cards may not use different setting methods on the same computer. To change
only the setting for [Use when starting computer], change the setting in
[Security] menu of the Setup Utility.
Ÿ page
( 58)
6
Select [Restart the computer after entering settings], then select
[Finish].
7
Change the settings as necessary.
Operation differs depending on the setting in step 5.
If you add the check mark for [Use when starting computer] in step 5:
<If the Supervisor Password has been set>
Enter the Supervisor Password, then select [OK].
<If the Supervisor Password has not been set>
1
Enter the Supervisor Password, then press Tab .
2
Reenter the Supervisor Password entered in step
3
Select [Yes] on the confirmation screen.
If you add the check mark for [Use when logging on to Windows] in step 5:
1
Enter the user name, then press Tab .
2
Enter the password, then press Tab .
3
Reenter the password entered in step
4
Select [Yes] on the confirmation screen.
CAUTION
G
An SD memory card with the above settings can be used as an ordinary memory
card in other devices as well. When using the SD memory card in another device,
do not delete [Private] folder. Doing so will cancel [Use when logging on to
Windows].
1
, then select [OK].
2
, then select [OK].
39