Panasonic CF-T1 Reference Manual page 38

SD Memory Card/MultiMedia Card
Initialization (SD Card Setup)
An SD memory card must be initialized in order to use the security function. Use the
following procedure to initialize an SD memory card.
1
Turn on your computer.
2
Insert the SD memory card in the SD memory card slot.
Windows XP
When [Removable disk] appears, select [Take no action], then select [OK].
3
Start the SD card setup program.
Windows 2000
Select [Start] - [Programs] - [Panasonic] - [SD Card Setup].
Windows XP
Select [start] - [All Programs] - [Panasonic] - [SD Card Setup].
If an SD memory card has not been inserted, the following message appears: "Set
the SD card in place". Insert an SD memory card and select [Retry].
4
Select [Next] in the Welcome screen.
5
Select the functions you want to use and the SD memory card
setting method, then select [Next].
A. Use when starting computer
Add the check mark if you want to use the SD memory card instead of a
password entry in order to start the computer.
A
B
C
D
B. Use when logging on to Windows
Add the check mark if you want to use the SD memory card instead of a
password entry on the Windows logon screen.
The Windows logon user and a password must be set in advance.
Windows XP
If the check mark is added, the Welcome screen will no longer appear and the
user switching function will be disabled.
C. Leave set*
Add the check mark if you want to leave the SD memory card put in place
instead of entering a password. The card may be removed after the computer is
started or after you log on to Windows.
Setting
Private folder
38
As many as two SD
memory cards can be
registered for a single
computer.