Viewing Attached Devices - NETGEAR DG834G Reference Manual

54 mbps wireless adsl firewall router
Hide thumbs Also See for DG834G:
Table of Contents

Advertisement

Clicking the Renew button updates the status information.
This screen shows the following statistics:
Table 6-1.
Connection Status Fields for PPPoA
Field
Description
Connection Time
The time elapsed since the last connection to the Internet via the ADSL port.
Connection Method The method the ADSL port acquired its TCP/IP configuration.
Negotiation
ON or OFF
Authentication
ON or OFF
IP Address
The IP Address assigned to the WAN port by the ADSL Internet Service Provider.
Network Mask
Then Network Mask assigned to the WAN port by the ADSL Internet Service Provider.

Viewing Attached Devices

The Attached Devices menu contains a table of all IP devices that the router has discovered on the
local network. From the Main Menu of the browser interface, under the Maintenance heading,
select Attached Devices to view the table, shown in
Figure 6-7: Attached Devices menu
For each device, the table shows the IP address, Device Name if available, and the Ethernet MAC
address. Note that if the router is rebooted, the table data is lost until the router rediscovers the
devices. To force the router to look for attached devices, click the Refresh button.
Managing Your Network
Reference Manual for the 54 Mbps Wireless ADSL Firewall Router DG834G
202-10006-01
Figure 6-7
6-9

Advertisement

Table of Contents
loading

Table of Contents