Restricting Wireless Access Based On The Wireless Station Access List - NETGEAR DG834G Reference Manual

Note: The SSID of any wireless access adapters must match the SSID you configure in the
DG834G 54 Mbps Wireless ADSL Firewall Router . If they do not match, you will not get a
wireless connection to the DG834G.

Restricting Wireless Access Based on the Wireless Station Access List

This list determines which wireless hardware devices will be allowed to connect to the firewall.
To restrict access based on MAC addresses, follow these steps:
Log in to the DG834G firewall at its default LAN address of
1.
user name of admin and default password of password, or using whatever LAN address and
password you have set up.
From the Wireless Settings menu, Wireless Station Access List section, click the Setup Access
2.
List button to display the list, shown below:
Figure 4-4. Wireless Access menu
Select the Turn Access Control On check box to enable restricting wireless computers by their
3.
MAC addresses.
Wireless Configuration
Reference Manual for the 54 Mbps Wireless ADSL Firewall Router DG834G
202-10006-01
http://192.168.0.1 with its default
4-7