Saeco Exprelia EVO User Manual page 82

ENGLISH
80
Machine actions
The machine takes a
long time to warm up or
the amount of water dis-
pensed from the wand is
too little.
The brew group cannot
be removed.
The brew group cannot be
inserted.
There is a lot of ground
coff ee under or over the
brew group.
The machine produces too
humid or too dry coff ee
grounds.
Causes
The machine circuit is clogged by
limescale.
The brew group is out of place.
The coff ee grounds drawer is
inserted.
The brew group is not in the off
position.
The gear is not in the initial posi-
tion.
The coff ee used may not be suit-
able for automatic machines.
The machine is adjusting the coff ee
grinder for a new kind of coff ee
beans or pre-ground coff ee.
Adjust the coff ee grinder.
Solutions
Descale the machine.
Turn on the machine. Close the ser-
vice door. The brew group automati-
cally returns to the initial position.
Remove the coff ee grounds drawer
before removing the brew group.
Make sure that the brew group is in the
off position. The arrows must face each
other. To this purpose, see the "Monthly
Lubrication of the Brew Group" chapter.
Insert the drip tray and the coff ee
grounds drawer and close the service
door. Turn on the machine. The gear
automatically returns to the initial
position. You can now insert the brew
group.
You may need to change the type of
coff ee or the coff ee grinder settings
(see the "Adjusting the Ceramic Coff ee
Grinder" chapter).
The machine automatically adjusts
itself after brewing several cups of
coff ee in order to optimise extraction in
relation to the compactness of ground
coff ee.
It may be necessary to brew 2 or 3
products to completely adjust the cof-
fee grinder.
This is not a machine malfunction.
Adjusting the ceramic coff ee grinder
aff ects the quality of residues.
If the residues are too humid, set a
coarser grind.
If the residues are too dry, set a fi ner
grind.
Refer to the "Adjusting the Ceramic Cof-
fee Grinder" chapter.