Saeco Exprelia EVO User Manual page 80

ENGLISH
78
Displayed message
INSERT CARAFE
ESC
0%
RESTART TO SOLVE
OK
DESCALE BEFORE
ACTIVATING FILTER
ESC
How to reset the message
Insert the milk carafe to start brewing. Press "
You need to descale the machine. Follow the steps described in the "Des-
caling" chapter of this manual.
Please note that not descaling your machine will ultimately make it stop
working properly. In this case, repair is NOT covered under your warranty.
The AQUACLEAN icon fl ashes and shows (0%). The machine needs the
AQUACLEAN water fi lter to be replaced.
Note:
If the fi lter is not replaced promptly, the machine will require a descaling
cycle to be performed.
The red light fl ashes. Press the "
Take note of the code (E xx) displayed in the right bottom corner.
Turn off the machine. Turn it back on after 30 seconds. Repeat the
procedure 2 or 3 times.
If the machine does not start, contact the Philips SAECO hotline in your
country and quote the code shown on the display. Contact details can
be found in the warranty booklet packed separately or at www.philips.
com/support.
The machine needs to be descaled as the 8-fi lter series has been used up.
After descaling, the machine will restart the count of the 8-fi lter series
from 0/8.
" to exit.
" button to exit the stand-by mode.