Saeco Exprelia EVO User Manual page 77

OK
PLACE A CONTAINER
UNDER HOT WATER &
CARAFE DISP SPOUT
STEP 2/2 RINSING
PAUSE
13 Empty the container and place it under both the steam/hot water
dispensing spout and the milk carafe dispensing spout. Press the " "
button.
14
The rinse cycle starts. The bar shows the cycle progress.
15
When the amount of water needed for the rinse cycle has been
completely dispensed, the machine automatically ends the descaling
process by showing this screen after a short warm-up phase.
16 Remove and empty the container.
17
Disassemble and wash the milk carafe as described in the "Weekly
Cleaning of the Milk Carafe" chapter.
18
Empty the (internal) drip tray and place it back.
19
Place the AQUACLEAN water fi lter (if any) back into the water tank.
20 The descaling cycle has been completed.
Note:
At the end of the descaling cycle, wash the brew group as described in the
"Weekly Cleaning of the Brew Group" chapter.
The rinse cycle is performed in order to have the circuit cleaned with a
preset amount of water to ensure proper machine performance. If the
water tank is not fi lled up to MAX level, the machine could require two or
more cycles.
ENGLISH
75 75