Fm Bandwidth & Mic Gain Control - Yaesu FT-8800R Operating Manual

Dual band fm tranceiver

Hide thumbs Also See for FT-8800R:

Table of Contents

ISCELLANEOUS

FM B

You can reduce the microphone input level and receiver bandwidth when operating on

tightly-clustered frequencies (channel spacing of 12.5 or 15 kHz). This will reduce the

transmitter and receiver deviation, thus minimizing interference to other users (and im-

proving reception, as well).

To configure for the narrower bandwidth, use the following procedure:

1. Press the [ SET ] key momentarily to enter the Set mode.

2. Rotate the "Main" band DIAL knob to select Menu #44 (WID.NAR

3. Press the "Main" band DIAL knob momentarily, then rotate the "Main" band DIAL

knob to change the display to "NARROW

4. Press and hold in the "Main" band DIAL knob for 1/2 second to save the new setting

and to normal operation.

To restore the normal (higher) microphone input level and normal (15 kHz) receiver band-

width, select "WIDE

WIDE" in step 3 above.

WIDE

ETTINGS

& MIC G

ANDWIDTH

NARROW

NARROW."

NARROW

AIN

ONTROL

WID.NAR

WID.NAR).

WID.NAR

FT-8800R Operating Manual

Table of Contents