Advanced Operation; Lock Feature; Keyboard Beeper; Channel Step Selection - Yaesu FT-8800R Operating Manual

A
DVANCED
In order to prevent accidental frequency change, the panel switches and DIAL knobs may
be locked out.
To activate the Lock feature:
1. Press the [ SET ] key momentarily to enter the Set mode.
2. Rotate the "Main" band DIAL knob to select Menu #21 (LOCK
3. Press the "Main" band DIAL knob momentarily, then rotate the "Main" band DIAL
knob to change the setting to "ON
4. Press the [ SET ] key momentarily to save the new setting and exit to normal operation.
5. To unlock the panel switches and DIAL knobs, select "OFF
A key/button beeper provides useful audible feedback whenever a key/button is pressed.
If you want to turn the beep off:
1. Press the [ SET ] key momentarily to enter the Set mode.
2. Rotate the "Main" band DIAL knob to select Menu #5 (BEEP
3. Press the "Main" band DIAL knob momentarily, then rotate the "Main" band DIAL
knob to change the setting to "OFF
4. Press and hold in the "Main" band DIAL knob for 1/2 second to save the new setting
and exit to normal operation.
5. To back on again the beep, select "ON
The FT-8800R's synthesizer provides the option of utilizing channel steps of 5/10/12.5/
15/20/25/50 kHz per step, any number of which may be important to your operating re-
quirements. The FT-8800R is set up at the factory with different default steps on each
operating band which probably are satisfactory for most operation. However, if you need to
change the channel step increments, the procedure to do so is very easy; remember to get
set up on the desired band before making any changes, as different steps may be programmed
for each operating band.
1. Press the [ SET ] key momentarily to enter the Set mode.
2. Rotate the "Main" band DIAL knob to select Menu #38 (STEP
3. Press the "Main" band DIAL knob momentarily, then rotate the "Main" band DIAL
knob to select the new channel step size.
4. Press and hold in the "Main" band DIAL knob for 1/2 second to save the new setting
and exit to normal operation.
24
O
PERATION
L F
OCK
ON ON ON."
ON
K
EYBOARD
OFF OFF
OFF OFF."
ON" in step 3 above.
ON ON
ON
C S
HANNEL TEP
EATURE
LOCK LOCK
LOCK LOCK).
OFF" in step 3 above.
OFF OFF
OFF
B
EEPER
BEEP). BEEP BEEP
BEEP
S
ELECTION
STEP STEP
STEP). STEP
FT-8800R Operating Manual