Yaesu FT-8800R Operating Manual page 69

Menu #39 [ SPCONT ]
Function: Defines the audio path to the external speaker (when used).
Available Values: EXT/OFF/ INT.EXT/INT
Default: EXT
EXT: The audio is routed to external speaker (internal speaker is off).
OFF: The audio is not routed (internal and external speakers are both off).
INT.EXT: The audio is routed to both the internal and external speakers.
INT: The audio is routed to the internal speaker only (external speaker is off).
Menu #40 [ TONE F ]
Function: Sets the CTCSS Tone Frequency.
Available Values: 50 Standard CTCSS Tones
Default: 100 Hz
Note: This Menu Item can be set independently for each band and, independently in each
memory.
Menu #41 [ TONE M ]
Function: Selects the Tone Encoder and/or Decoder mode.
Available Values: OFF/ENC/ENC.DEC/DCS
Default: OFF
ENC: CTCSS Encoder
ENC.DEC: CTCSS Encoder/Decoder
DCS: Digital Code Squelch Encoder/Decoder
Menu #42 [ TOT ]
Function: Sets the Time-Out Timer.
Available Values: 1 - 30 minutes or OFF
Default: 6 minutes
Menu #43 [ VFO.TR ]
Function: Enables/disables the VFO Tracking
feature.
Available Values: ON/OFF
Default: OFF
FT-8800R Operating Manual
(" S
M
ENU
CTCSS TONE FREQUENCY ( Hz )
67.0 69.3
82.5 85.4
100.0 103.5
123.0 127.3
151.4 156.7
171.3 173.8
189.9 192.8
210.7 218.1
250.3 254.1
") M
ET ODE
71.9 74.4 77.0
88.5 91.5 94.8
107.2 110.9 114.8
131.8 136.5 141.3
159.8 162.2 165.5
177.3 179.9 183.5
196.6 199.5 203.5
225.7 229.1 233.6
– – –
79.7
97.4
118.8
146.2
167.9
186.2
206.5
241.8
–
67