Installing A 2.5 Inch Hard-Drive Blank - Dell PowerEdge R430 Owner's Manual

Steps
Press the release button and slide the hard-drive blank out of the hard-drive slot.
Figure 20. Removing and installing a 2.5 inch hard-drive blank
1. hard-drive blank
Related Tasks
Removing the front bezel
Installing the optional front bezel

Installing a 2.5 inch hard-drive blank

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Ensure that you read the
2. If installed, remove the front bezel.
Steps
Insert the hard-drive blank into the hard-drive slot until the release button clicks into place.
Next steps
If applicable, install the front bezel.
Related Tasks
Removing the front bezel
Installing the optional front bezel
66
Safety instructions.
2. release button