Installing The Optional Internal Dual Sd Module; Integrated Storage Controller Card; Removing The Integrated Storage Controller Card - Dell PowerEdge R430 Owner's Manual

Convention
D
E
Next steps
1. Installing the dual SD module.
2. Follow the procedure listed in

Installing the optional internal dual SD module

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Ensure that you follow the
2. Follow the procedure listed in
Steps
1. Locate the Internal Dual SD Module (IDSDM) connector on the system board. To locate the internal
dual SD module connector, see .
2. Align the IDSDM with the connector on the system board.
3. Push the IDSDM until it is firmly seated on the system board.
Next steps
1. Install the SD card(s).
NOTE: Temporarily label each SD card with its corresponding slot before removal. Replace the
SD card(s) into the same slots.
2. Follow the procedure listed in

Integrated storage controller card

Your system includes a dedicated expansion-card slot on the system board for an integrated controller
card. The integrated storage controller card provides the integrated storage subsystem for your system's
internal hard drives. The controller supports SAS and SATA hard drives and also enables you to set up the
hard drives in RAID configurations as supported by the version of the storage controller included with
your system.

Removing the integrated storage controller card

Prerequisites
1. Ensure that you read the
2. Follow the procedure listed in
3. Remove the cooling shroud.
IDSDM indicator code
Amber
Not lit
After working inside your
Safety instructions.
Before working inside your
After working inside your
Safety instructions.
Before working inside your
Description
Indicates that the card is offline, has failed, or is
write protected.
Indicates that the card is missing or is booting.
system.
system.
system.
system.
93