Connecting The Cables; Connecting The Power Cord And The Network Cable - Roland Advanced Jet AJ-1000i Setup Manual

4. Connecting the Cables

Connecting the Power Cord and the Network Cable

WARNING
WARNING
CAUTION
Ethernet (100BASE-TX recommended)
Dryer power-cord
connector
Ethernet cable
(Category 5 or higher)
Never insert a
telephone cable.
26
Connect to an electrical outlet that complies with this machine's ratings (for volt-
age, frequency, and current).
Incorrect voltage or insufficient current may cause fire or electrical shock.
Connect to ground.
This can prevent fire or electrical shock due to current leakage in the event of
malfunction.
Perform this task with all power switches left switched off.
Otherwise sudden movement of the machine may cause injury.
Power cords
Ratings
Electrical outlets:
200V to 240V, 10A or more
The printer and the dryer require separate high-
amperage electrical outlets. Connect the two
power cords to outlets on separate systems.
Also, make sure that the electrical outlets meet
the machine's ratings.
Printer power-cord
connector
Take care to ensure no con-
tact with the media or rollers.