Interlogix truvision 21 Quick Start Manual page 4

Figure 2: Front panel controls
Item Name
1. Numeric buttons
2. USB Interfaces
3. Status LEDs
4. Archive button
5. Direction
Enter button
6. PTZ buttons
7. IR receiver
EN : 2
Description
Switch between different cameras in live, PTZ control or playback
modes.
Universal Serial Bus (USB) ports for additional devices such as a
USB mouse and USB Hard Disk Drive (HDD).
Power: Green indicates the NVR is working correctly. Red indicates
a fault.
Alarm: Red indicates that there is a sensor Alarm In or another alarm
such as motion or tampering.
Tx/Rx: Green indicates a normal network connection.
HDD: HDD indicator blinks red when data is being read from or
written to the HDD.
Ready: Green indicates the device is functioning properly.
Archive: Archive indicator blinks green when record files or pictures
are being exported to a USB or eSATA device.
Press once to enter quick archive mode. Press twice to start
archiving. Indicator blinks green when data is being written to backup
device.
The DIRECTION buttons are used to navigate between different
fields and items in menus.
In the Playback mode, the left and right buttons are used to speed up
and slow down recorded video. The up and down buttons are used to
jump recorded video forwards or backwards by 30 s.
In Pause mode, the left and right buttons are used to jump recorded
video forwards or backwards by one frame. The up and down buttons
are used to jump recorded video forwards or backwards by one
second.
In Live View mode, these buttons can be used to cycle through
channels.
In PTZ Control mode, it can control the movement of the PTZ
camera.
The ENTER button is used to confirm selection in any of the menu
modes.
In single-frame Playback mode, pressing the button will advance the
video by a single frame.
Zoom: Use + and – for digital zoom.
Preset: Call up preprogrammed preset positions.
Tour: Call up preprogrammed shadow tours.
Receiver for IR remote.
TVN 21 Quick Start Guide