Inserting The Battery; Charging The Battery; Using The Power Adapter - Creative MuVo_2_QSG Manual

Multi_cle.book Page 5 Monday, September 20, 2004 12:36 PM
2
2

Inserting the Battery

Insert the supplied battery into your player as shown below.
3
3

Charging the Battery

You can charge your battery by connecting your player to a power outlet using the supplied
power adapter, or by connecting your player to your computer's USB port using the
supplied USB cable.

Using the power adapter

Connect one end of the power adapter to the wall outlet
and the other end to your player's power adapter
connector, as shown in Figure 2. Charging your battery for
the first time takes about three hours. When
on your player's LCD, your player is fully charged.
You can also charge your player's battery using the supplied USB cable. For more
information, see "Using the USB Cable" in your User's Guide. Do not charge your
player's battery via the USB port until after you have installed the software.
appears
Figure 2
5