Tire Inspection - Yamaha YQ50 Service Manual

AIR BLEEDING (HYDRAULIC BRAKE SYSTEM/
Tire pressure (cold)
Up to 90 kg
(1.50 kgf/cm
90 kg ~ maximum
load * (1.50 kgf/cm
Maximum load :
Maximum load is the total weight of rider, passenger,
*
accessories and luggage.
STEERING HEAD ADJUSTEMENT
Front Rear
150 kPa 150 kPa
2 ) (1.50 kgf/cm
150 kPa 150 kPa
2 ) (1.50 kgf/cm
180 kg (396.9 lb)
Securing nut :
NOTE :
Install the torque wrench on the ring nut wrench
so that it makes a 90° angle with it.
G
Move the handlebar up and down and from
front to rear. If steering play is too important,
354001
tighten the nut to the specified torque.
Stearing head nut :

TIRE INSPECTION

1. Measure :
• Air pressure
Out of specification © Adjust.
WARNING
Proper loading of your scooter is important
for the handling, braking, and other perfor-
2 )
mance and safety characteristics of your
scooter. Do not carry loosely packed items
2 )
that can shift.
Securely pack your heaviest items close to
the center of the scooter, and distribute the
weight evenly from side to side. And check
the condition and pressure of your tires.
NEVER OVERLOAD YOUR SCOOTER.
Make sure the total weight of the cargo, rider,
passenger, and accessories (fairing,
saddlebags, etc. if approved for this model)
does not exceed the maximum load of the
scooter. Operation of an overloaded scooter
could cause tire damage, an accident, or
even injury.
3-24
INSP
ADJ
23 Nm (2.3 m.kg)
60 Nm (6.0 m.kg)