Removal - Yamaha YQ50 Service Manual

CHAS
STEERING HEAD AND HANDLEBAR
STEERING HEAD AND
HANDLEBAR

REMOVAL

WARNING
Securely support the scooter so there is no
danger of it falling over.
1. Place the scooter on an even surface.
2. Remove :
• Front fender
• Inner panels
• Upper handlebar cover
Refer to section "REMOVAL AND INSTALLATI-
ON OF COVERS" in Chapter 3.
3. Drain :
• Front and rear brakes system
Refer to section "FRONT BRAKE" in Chapter 6.
4. Remove :
• Front and rear brakes master cylinder
Refer to section "FRONT BRAKE" in Chapter 6.
5. Remove :
• Front and rear brakes calipers mounting bolts
6. Remove :
• Front wheel
Refer to section "FRONT BRAKE" in Chapter 6.
7. Remove :
• Throttle grip
8. Disconnect :
• Ground wire
• All couplers
• Wire harness band
• Clamp
9. Remove :
• Nut Q
• Bolt
• Handlebar
10. Remove :
• Ring nut
• Washer
354001
7-23