Yamaha YQ50 Service Manual page 27

Q Rear brake hose
W Seat lock cable
E Wire harness
R Throttle cable
T Starter (choke) cable
Y Speedometer cable
U Frame
I Oil hose (tank/oil pump)
O Oil hose (oil pump/carburetor)
P Water hoses
27°±10°
D
CABLE ROUTING
A Install the rear brake hose in the clip.
B Install the oil delivery hose (from oil pump to carburator) under the
water hose.
C Pass the rear brake hose under the frame reinforcement tube.
D Align the mark on the water hose in front of the mark in the water pump
housing.
E Pass the speedometer cable through the slot of the front fender.
F Install the 8 clamps just beside the marks at the end side of the hoses.
B
C
2-12
SPEC
A
F
E