Pci/Plug And Play Setup Page - Mercury KVM400M-L User Manual

PCI / Plug and Play Setup Page
This page sets some of the parameters for devices installed on the
PCI bus and devices that use the system plug and play capability.
AMIBIOS SETUP – PCI / PLUG AND PLAY SETUP
(C) 2000 American Megatrends, Inc. All Rights Reserved
Share Memory Size
Primary Graphics Adapter
Allocate IRQ to PCI VGA
PCI IDE BusMaster
Share Memory
This item lets you allocate a portion of the
Size
main memory for the onboard VGA display
application with 8/16/32MB options.
Primary Graphics
This item indicates if the primary graphics
Adapter
adapter uses the PCI or the AGP bus. The
default PCI setting still lets the onboard
display work and allows the use of a second
display card installed in a PCI slot.
Allocate IRQ to
If this item is enabled, an IRQ will be
PCI VGA
assigned to the PCI VGA graphics system.
You set this value to No to free up an IRQ.
PCI IDE BusMaster
This item enables or disables the DMA under
DOS mode. We recommend you to leave this
item at the default value.
32MB
PCI
Yes
Disabled
↑↓←→ : Select Item
ESC : Quit
F1 : Help PU/PD/+/- : Modify
F5 : Old Values (Shift)F2 : Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
27