Install Other Devices - Mercury KVM400M-L User Manual

Please check the pin assignment of the cable and the
USB header on the mainboard. Make sure the pin
assignment will match before plugging in. Any
incorrect usage may cause unexpected damage to the
system. The vendor won't be responsible for any
incidental or consequential damage arising from the
usage or misusage of the purchased product.
SIR1: Infrared Port
The infrared port allows the wireless exchange of information
between your computer and similarly equipped devices such as
printers, laptops, Personal Digital Assistants (PDAs), and other
computers.
Pin Signal
1 NC
3 +5V
5 IRTX
1. Locate the infrared port SIR1 connector on the mainboard.
2. If you are adding an infrared port, connect the ribbon cable
from the port to the IR1 connector and then secure the port to
an appropriate place in your system chassis.

Install Other Devices

Install and connect other devices in the system as steps below.
FDC1
1
IDE1
1
Pin Signal
2 KEY
4 GND
6 IRRX
1 IDE2
16