Install The Mainboard - Mercury KVM400M-L User Manual

Jumper JP3: CPU Clock Selector
This jumper selects the processor clock frequency.
CPU Clock Pins 1-2
133 MHz Off
166 MHz Off
100 MHz On
200 MHz On

Install the Mainboard

Install the mainboard in a system chassis (case). The board is a
FLEX ATX size mainboard. You can install this mainboard in an
ATX case. Ensure your case has an I/O cover plate that matches
the ports on this mainboard.
Install the mainboard in a case. Follow the instructions of the case
manufacturer to use the hardware and internal mounting points on
the chassis.
1
SYS_ FAN1
1
PANEL1
Connect the power connector from the power supply to the CN3
connector on the mainboard. J3 is the CPU Vcore power
connector.
If there is a cooling fan installed in the system chassis, connect the
cable from the cooling fan to the SYS_FAN1 fan power connector
on the mainboard.
Connect the case switches and indicator LEDs to the PANEL1
connector.
Pins 3-4
Off
On
Off
On
13
J3
CN3