Expansion Slots - Mercury KVM400M-L User Manual

Expansion Slots

This mainboard has one AGP, one CNR and two 32-bit PCI slots.
CNR1
PCI2 PC1
PCI1
Follow the steps below to install an AGP/CNR/PCI expansion
card.
1. Locate the AGP, PCI or CNR slot on the mainboard.
2. Remove the slot cover from the system chassis.
3. Insert the expansion card edge connector into the slot and press
it firmly down until fully inserted.
4. Secure the expansion card bracket in the system chassis with a
screw.
PCI (Peripheral Components Interconnect) Slots
You can install the 32-bit PCI interface expansion cards in the
slots.
AGP (Accelerated Graphics Port) Slot
You can install a graphics adapter supporting 8xAGP specification
in the AGP slot. This slot has one 8xAGP edge connector.
CNR (Communications Networking Riser) Slot
The CNR (Communications Networking Riser) slot is an industry
standard slot that allows for the installation of a special audio/
modem riser card. Different territories have different regulations
regarding the specifications of a modem card. You can purchase an
approved CNR card in your area and install it directly into the
CNR slot.
AGP1
19