I/O Ports - Mercury KVM400M-L User Manual

I/O Ports

The illustration below shows a side view of the built-in I/O ports
on the mainboard.
PS/2 Mouse
PS/2 Keyboard
Parallel Port
(PRN)
COM1
LAN Port
(optional)
USB Ports
Audio Ports
(optional)
(shared
with J6)
Use the upper PS/2 port to connect a PS/2
pointing device.
Use the lower PS/2 port to connect a PS/2
keyboard.
Use the Parallel port (PRN) to connect
printers or other parallel communications
devices.
Use the COM port to connect serial devices
such as mice or fax/modems. COM1 is
identified by the system as COM1/3.
Connect an RJ-45 jack to the LAN port to
connect your computer to the Network.
Use the USB ports to connect USB devices.
Note: The lower USB port located beside the
VGA port is shared with the J6 connector.
Use the three audio ports to connect audio
devices. The first jack is for stereo Line-In
signal. The second jack is for stereo Line-
Out signal. The third jack is for Microphone.
9